RENNKIT’s patented eRam Kit™ includes all necessary electrical connections and hardware for easy DIY, dealer or Porsche specialist shop installation in under 2 hours. Instruction and video links sent upon purchase. Upgrade your wing to our higher, faster, lighter eRam Kit™ today!
996 Turbo eRam Kit™ (Patented)
*Scroll down for optional SuperFast, Pin Wrench, Dust & Moisture Boots
4.75 in 996 Turbo Standard eRam Kit
119mm - 11 sec. stroke - adds 2.4 inches to coupe OEM wing height! Parks 3/4 in. above deck lid. BEST DOWNFORCE
$1,799.00
4.8 in 996 Turbo eRam Kit for 997 Turbo Wing
122mm - 11 sec. stroke - adds 2.5 inches to coupe OEM wing height! Parks .8 in. above deck lid. ULTIMATE DOWNFORCE
$1,799.00
4 inch 996 Turbo eRam Kit
100mm - 11 sec. stroke - adds 1.6 inch to coupe OEM wing height. EXCELLENT REAR DOWNFORCE
$1,699.00
3 inch 996 Turbo eRam Kit
75mm - 9 sec, stroke, adds 0.6 inch height to OEM Coupe wing, some downforce benefit
$1,599.00
2 inch 996 Turbo eRam Kit
50mm - 7 second stroke. Height is between Coupe & Cabrio - the most economical alternative
Upgrade to 5 sec. stroke for 4 in., 3 sec. for 3 in. and 3 sec. for 2 in eRam Kit
$99.99
Pin Wrench
Safely remove 996 or 997 Turbo Wing from OEM Rams (a must for the 997 Turbo!)
$49.99
Dust & Moisture Boots
Rubber boot set to protect your eRam Kit™ investment
$49.99
996 Turbo Wing Lugs
For factory or aftermarket wings without lugs
$99.99
For Cars with dead wing or fixed wing displaying SPOILER WARNING:
(this is included with eRam Kit)
MicroModule Device
The MicroModule Device prevents the dreaded SPOILER WARNING
$149.99
Carrera GT eRam Kit™ (Patented)
OPTION 1: COMPLETE SOLUTION INCLUDING MACHINING
Ship elevator mechanisms to Rennkit. We machine (completely reversible back to factory hydraulics), assemble, bench test and ship the working assembly with eRam Kit™ installed – ready to mount in the car. Complete illustrated step by step installation instructions sent with order. $7995
Approximately 3 to 5 week turn around for this service. Elevator Shipment Instructions – click HERE
OPTION 2: MACHINING BY CUSTOMER’S SHOP
eRam Kit™ sent to customer along with CAD drawings for center sliding plate modifications and illustrated step-by-step instruction link. $7595